Update Xcalibur 1.4 Processing
This update changes the way Acquisition Processing is initiated in Xcalibur 1.4 to correct a situation where Processing sometimes fails to occur if a 'None' or 'No Bracketing' Sequence is specified.
Download Software Update (205 KB) 

Xcalibur for PolarisQ 1.4.1 SP2
PolarisQ 1.4.1 SP2 improves RF frequency calibration. Old SIM methods can now be read and the isolation time is displayed properly. Problems with instrument communication during Automatic Tune have been fixed.
Download Software Update (2.03 MB) 

Xcalibur for DSQ 1.4.1 SP7 / DSQ II 1.4.2 SP2
This Service Pack for DSQ / DSQ II Software versions 1.4.1 and 1.4.2 contains all enhancements present for DSQ and DSQ II. This service pack requires Xcalibur Data System version 1.4 SR1 and DSQ version 1.4.1 or 1.4.2 must have been already installed. Microsoft .NET Framework version 2.0 must have been already installed even if a later .NET Framework version is already installed.
Download Software Update (1.44 MB) 

Xcalibur 1.3.1 SP5 for TRACE DSQ 
This service pack for TRACE DSQ software contains all enhancements present for DSQ version 1.4.1 SP2 instrument control devices. This service pack requires Xcalibur Data System version 1.3 and Trace DSQ version 1.3.1 must already be installed.
Download Service Pack (2.3 MB) 

Xcalibur 1.3.0 SP1 for TRACE MS Plus 
Service Pack for the TRACE MS plus, installation instructions, and enhancement description document.  
Download Service Pack (2.8 MB Zip File) 

Xcalibur 1.3.0 SP1 for GCQ, Polaris and PolarisQ
Service Pack for the GCQ, Polaris and Polaris Q. Requires Xcalibur Data System version 1.3 and GCQ/Polaris/PolarisQ Software version 1.3.0 installed.
Download Service Pack (1.2 MB) 

Xcalibur 1.2.1 SP1 for GCQ, Polaris and PolarisQ
Service Pack for the GCQ, Polaris and Polaris Q. Requires Xcalibur Data System version 1.2 and GCQ/Polaris/PolarisQ Software version 1.2 installed.
Dowload Service Pack (780KB) 

Xcalibur 1.2.2e SP1 for PolarisQe
Service Pack for the PolarisQe Software. Requires Xcalibur Data System version 1.2 and PolarisQ version 1.2.2e installed.
Download Service Pack (424 KB) 

Xcalibur 1.2 SP3 for GC devices
Service Pack for all Xcalibur GC devices including autosamplers. Requires Xcalibur Data System 1.2, GCQ/Polaris/PolarisQ software version 1.2  or greater and GC Devices previously installed. Service Pack 3 includes the fixes previously made for Service Pack 1 and Service Pack 2.
Download Service Pack (497 KB) 

Xcalibur 1.1 GC Devices Update - HP5890 or GC8000Top
Service Pack update for Xcalibur 1.1. should be installed if GCQ or Polaris is configured with a HP5890 or GC8000 top.
Download Service Pack (2.4 MB) 

Xcalibur 1.0 SP Update for TPI
If you have installed Xcalibur 1.1, the TPI update is already included.
Download Service Pack (190KB) 

GCQ2.2 SP Update for TPI
Service Pack for GCQ Benchtop Ion Trap GC/MS. 
Download Service Pack (131 KB) 

AI/AS 3000 Firmware Version 1.27
Download AS_1_27.bin file (10 Kb)  
AI/AS 3000 Firmware Loader
Download the loader.zip file (5 MB)