| ICP OES Accessories Overview |
 |
  |
| |
ICP-OES
Accessories
In addition to a wide range of nebuliser, spray chamber and torch combinations, the iCAP 6000 supports a very comprehensive range of accessories to allow analysis of almost any type of sample.
Autosamplers
ASX260 Autosampler
Automated unattended analysis of up to 180 samples, ideal for smaller laboratories. |
 |
ASX520 Autosampler
Automated unattended analysis of up to 360 samples, ideal for busy laboratories. |
 |
EXR-8 Autosampler
Automated unattended analysis of up to 720 samples, ideal for high throughput routine analysis. |
 |
Nebulizers
USN 5000 AT+ Ultrasonic Nebulizer
Improved nebulization and sample transport efficiency allows sub ppb detection limits for many elements. Can also be used to simplify the analysis of volatile organic solvents. |
 |
V-Groove Nebulizer
Glass spray chambers supplies for removal of particles from aqueous or organic solutions. The GV-Groove high solids nebulizer is used in conjunction with the Cyclone or Conical glass spray chambers for aspirating aqueous or organic solutions containing particulate matter. Not to be used with HF. |

|
Concentric Glass Nebulizer
The Concentric Glass nebulizer is the standard nebulizer supplied with the conical and cyclonic spray chambers.
Aerosalt High Solids Concentric Glass Nebulizer
Used in conjunction with Cyclone or Conical Spray Chamber. For use with all solvents EXCEPT HF. |
 |
Burgener Miramist High Solids Nebulizer
This nebulizer is used in conjunction with the CYCLONE Spray Chamber. May be used with all solvents. |
 |
Sample Handling Kits
Radial Sample Handling Kits
Standard Kit
– Complete kit optimized for normal aqueous solutions up to 3 % m/v dissolved solids
High Solids Kit
– Optimum kit for extended analysis of solutions containing up to 20 % m/v dissolved solids
– Use in conjunction with the argon humidifier (separate) for ultimate solids efficiency
Organics Kit
– Optimum kit for relatively non-volatile organics such as xylene, white spirit and kerosene
– The dedicated radial view ICP is the optimum choice for wear metals in used oil
Volatile Organics Kit
– Jacketed, baffled spray chamber for volatile organics such as ketones, alcohols and aldehydes
– Additional chiller will be required to cool the spray chamber
Hydrofluoric Acid Kit
– Complete application solution for sample solutions containing un-complexed hydrofluoric acid.
– All components in contact with the HF solutions are composed of resistant plastics or alumina ceramic |
 |
Duo Sample Handling Kits
Standard Kit
– Complete kit optimized for normal aqueous solutions up to 3 % m/v dissolved solids
High Solids Kit
– Optimum kit for extended analysis of solutions containing up to 20 % m/v dissolved solids
– Use in conjunction with the argon humidifier (separate) for ultimate solids efficiency
Organics Kit
– Optimum kit for relatively non-volatile organics such as xylene, white spirit and kerosene
– The dedicated radial view ICP is the optimum choice for wear metals in used oil
Volatile Organics Kit
– Jacketed, baffled spray chamber for volatile organics such as ketones, alcohols and aldehydes
– Additional chiller will be required to cool the spray chamber
Hydrofluoric Acid Kit
– Complete application solution for sample solutions containing un-complexed hydrofluoric acid.
– All components in contact with the HF solutions are composed of resistant plastics or alumina ceramic |
 |
Other Accessories
U266 Macro laser
High energy 266nm UV laser. Ideal for direct analysis of difficult materials such as glasses, ceramics, plastics, paints, composite fibres etc. |
 |
Hydride accessory
Integrated hydride generation accessory with high efficiency micro porous membrane gas liquid separator. Allows sub ppb detection limits for As, Bi, Hg, Sb, Se, Sn, Te. |
 |
Argon humidifier
Minimizes time consuming and potentially expensive blockages of glass concentric nebulizers when analyzing samples containing high levels of dissolved solids. |
 |
SSEA – Separate Sample and Excitation Accessory
Allows direct analysis of solid samples with sub ppm detection limits. Ideal for applications requiring analysis of both liquid and solid samples with a single spectrometer. |
|
|
| |
|
| |
|
|
 |
|
|