Shandon LM-4 Downdraft Autopsy Table

  Shandon LM-4 Downdraft Autopsy Table



The Shandon LM-4 is a height-adjustable autopsy table that allows you to raise and lower the tabletop over a 5” (12.7 cm) range; includes four (4) grid plates.  An optional configuration with slats is also available (shown at left).   

   Product Detail


Shandon LM-4 Features

Grid Plate Work Surface
The grids are fabricated of 18-gauge, type 304 stainless steel with a #4 finish. Each grid plate has two 11-gauge stainless steel stand-offs to provide fluid drainage.

Pedestal
Fabricated of 14-gauge, type 304 stainless steel with a #4 finish. The pedestal acts as an air plenum for the downdraft. The pedestal is also flanged on the interior with four 0.625" (1.6 cm) diameter holes for mounting to facility floor.

Downdraft Ventilation
Integral downdraft ventilation assembly provides a passageway for fumes to be exhausted downward from the work surface through the pedestal of the table.

Tabletop
Fabricated of 14-gauge, type 304 stainless steel with a #4 finish and constructed with full 1” (2.54 cm) radius corners for easy cleaning and sanitation. All edges are flanged around the full perimeter along with a welded-in 14-gauge “U”-formed channel and angled cross supports providing maximum strength and durability.

Acoustic Coating
Applied to the underside to deaden sound and to prevent condensation, the coating is applied and then sealed with silver enamel paint.

Welding
All welds utilize only stainless steel as a filler medium. All visible welds shall be ground smooth and regrained to match the #4 finish.

Plumbing
All external plumbing parts are brass with a heavy chrome plating finish.

Vacuum Breaker
Vacuum breakers protect the potable water supply.

Sink
A large single compartment sink is provided on the end of table. A leverhandle drain or a disposal is provided.

Faucet
Located at the end of the table, a hot/cold faucet is supplied with a swivel spout, built-in vacuum breaker and wrist-blade handles.

Built-In Table Rinse
Built-in continuous flow table rinse with 10 spray nozzles, complete with vacuum breaker and flow control valve.

Hydro-aspirator
Deluxe hydro-aspirator with reverse flow is supplied. It is complete with control valve, vacuum breaker, air gap and plastic tubing.

Hand Spray
All tables come with spray nozzle, on/off control valve located on the table base to control water pressure, and flexible spray hose. 

Duplex Receptacle
A hospital-grade duplex GFCI (ground fault current interrupter) receptacle is provided on 110-120V units. This feature interrupts the electrical supply when a ground fault occurs to protect the user against electrical shock.

A hospital-grade duplex receptacle is provided on 220-240V units. This receptacle does not protect against shock, however, it is ready for the customer to connect it to an RCD (residual current device) which does protect against shock.

Optional Design Features
1.  Five (5) 5” (12.7 cm) slats (No. 106783) and one (1) 7” (17.8 cm) slat (No. 106785).
2.  No. 820 Scale Support Bracket for No. 1320 Post-mortem Scale or No. 1330 Digital Post-mortem Scale.
3.  Centimeter and/or inch/foot markings engraved on the edge of the tabletop. No. 3131 – centimeter; No. 3132 – inch/foot.  
 Shandon LM-4 Downdraft Autopsy Table
 Product# Price  Description  Voltage  
         
 10130      -    Shandon LM-4, without disposal 110-120V, 60 Hz   SELECT  
 10135      -    Shandon LM-4, with disposal 110-120V, 60 Hz   SELECT  
 10140      -    Shandon LM-4, without disposal 220-240V, 50/60 Hz   SELECT  
 10145      -    Shandon LM-4, with disposal 220-240V, 50/60 Hz   SELECT  
Purchase Details
 
Request Quote
Product Contact
 Sales Contact
  Service Contact
 
Specifications:
Dimensions (H x W x D) :Unit: 32-37” x 102” x 29.5” (81.3-94 x 259.1 x 74.9 cm), Sink: 5” x 14” x 14” (12.7 x 35.6 x 35.6 cm)
Weight :750 lbs. (340.2 kg)
Power Requirements :110-120V, 60 Hz and 220-240V, 50/60 Hz units available
Power Supply Requirements (by customer) :One circuit for duplex receptacles. One circuit for lift and units with disposal. Liquid-tight junction box and conduit connectors.
Plumbing Supply Requirements (by customer) :Inlet: Provide one (1) cold water supply, 0.75" (1.9 cm) hard copper. Provide one (1) hot water supply, 0.50" (1.3 cm) hard copper. Waste: Provide one (1) standard 1.50" (3.8 cm) copper waste line. If drain trap is required, must be installed by customer.
Disposal :1/2 HP included on models 10135 and 10145 (use is prohibited in some areas; consult building codes prior to ordering a disposal)
Ventilation :Recommended 700-850 cfm (0.330-0.401 cu. m/s) for unit. Approx. pressure drop: 0.9-1.3 inches w.g, (2.24-3.24 mb) not including losses due to customer ductwork.
Agency Approvals :UL / cUL (110-120V units) and CE (220-240V units)