CID8710D1M Radiation Hard Solid State Camera - RS-170

  CID8710D1M Radiation Hard Solid State Camera - RS-170



The Radiation Hardened CID8710D1M solid-state monochrome video camera features a 2:1 Interlace scanned Charge Injection Device (CID) based imager with 12 x 13.7 micron pixels in 776(H) x 512(V) RS-170 version format.  The CID8710D1M features minimum radiation tolerance of at least 1 x 106 rads total dose gamma (1 MegaRAD) total dose, superior Anti-Blooming performance inherent to all CIDs, and command stop motion to capture and read asynchronous high-speed events in center frame. 

   Product Detail


The CID8710D1M camera is tolerant to gamma, neutron, high energy electrons, and proton radiation, and since pixel charge readout is within the CID pixel, there is limited potential of single event disruptions common with other imaging technologies.  The CID structure is inherently radiation resistant, and with specific modifications to the CID process, has been made radiation hardened.  

The imager is also inherently Anti-Blooming and tolerant to highly specular lighting overloads.  Optical overloads are highly contained within each pixel or the immediately surrounding pixels so charge is not shared with adjacent rows or columns.  The spectral response is from 400nm to 1100nm and coatings are available for X-ray, deep UV and IR.

CID imagers have a contiguous uniform pixel structure where the total sensor is active with virtually no opaque areas which facilitate interpixel interpolation for subpixel edge definition. Cameras are available in CCIR or Progressive Scan formats upon request. 

A versatile camera head-mounting feature simplifies installation in small spaces, and the standard "C" mount lens adapter provides back-focus adjustments.

The CID8710D1M camera requires an external power source supplying +11.5 to +17VDC.


Features:

  • CID (Charge Injection Device)
  • 1 x 106 Rad Total Dose (gamma)
  • Excellent Image at 7 x 105 rads/hr
  • High-Resolution
  • Small Size
  • Replaceable Remote Head
  • No Geometric Distortion
  • Selectable 2x, and 0.5 video gain boost

 

Applications:

  • Inspection and measurement
  • Process monitoring
  • Laser beam profiling
  • Robotic handling
 
Purchase Details
SKU : SID-CID8710D1M 
Request Quote
Contact Sales
 Sales
  Service
 
Specifications:
I M A G E R :
Total Pixels :776(H) x 512(V)
Displayed Pixels :755(H) x 484(V)
(RS-170 Mode)
Pixel Size :12µm x 13.7µm
Full Well Capacity :>250,000 electrons
Active Area :11mm diagonal
Optical Format :2/3"
E L E C T R I C A L :
Scanning Format :RS-170, 30FPS, Interlace
Resolution :>500 TVL (horizontal)
S/N Ratio :47dB (typical)
Meas. Peak Signal/RMS Noise
(10KHz - 4.2MHz)
Sensitivity :Full Output at 0.7fc Faceplate
0dB Gain
Illumination (T=2850K)
Composite Video :1V p-p, terminated into 75-ohms
Black Level :+50mV (Auto Black Clamp)
White Level :+700mV
Sync Level :-300mV
Geometric Distortion :0%
Input Power :18 Watts (max.)
Input Voltage - Camera :+15VDC Nominal
(+14.5 to 15.5VDC)
Input Voltage - Line Adaptor :115 or 220 VAC
±10%, 50/60Hz
Input Current :Camera (@15VDC)
1.2A avg.
Spectral Response :Download Product PDF data sheet for Response Curve
Gain :x2, x0.5
(internally switch selectable)
I N T E R F A C E :
Outputs :(J1) Video, End of Frame, End of Line, H & V Drive, Composite Sync, Blanking

(J2) Video, ALC, 14.318Mhz ER Clock

(BNC) Composite Video
Inputs :(J1) +15VDC, H Drive
/Composite Sync

(J2) V Drive, Inject Inhibit, Frame Reset
M E C H A N I C A L :
Weight :(CCU) - 0.93 kg.
(33 oz.)

(Head) 0.27 kg.
(9.7oz.)
Dimensions :Download Product PDF Data Sheet for detailed drawing
Cable Length :30 meters
(other lengths optional)
Lens Mount :Standard "C" Mount
(1.0" - 32 Thread)
Camera Mount :1/4" - 20 Thread
Connectors :(J1) 25 Pin D
(male)

(J2) 25 Pin D (female)

(J3) 26 Pin D
(female)

(BNC) standard
E N V I R O N M E N T :
Temperature Range -
Operating :
0°C to 30°C Case
Temperature Range -
Storage :
-25°C to 85°C
Humidity :0 - 95%, non-condensing
Shock :50G
(1/2 sinewave at
10ms duration)