SHARP Monitor, Model 5030
 
  Downloadable Files:
 
  Technical Information
more »
 
 
 

  SHARP Monitor, Model 5030


New! The Thermo Scientific SHARP Monitor, Model 5030 has been awarded US EPA PM-2.5 FEM designation: EQPM-0609-184. Details...

 

   Product Detail


Synchronized Hybrid Ambient Real-time Particulate Monitor that combines light scattering photometry and beta radiation attenuation in one instrument. Now you can have simple, accurate, precise particulate monitoring.  At any time resolution.

This unique instrument combines nephelometry and beta attenuation sensing technologies for fast accurate readings that are highly time resolved.  Intellegent RH control and frequent filter changes eliminate water vapor without loss of volatile organic compounds.  It also allows you to spend more time - approximately 99% - capturing data.

The SHARP includes the Intelligent Moisture Reduction System (IMR) that regulates humidity levels by using a heating system that is linked to an upstream relative humidity sensor providing a truly realistic and representative measurement of the relative humidity at the particulate measurement head.  The result is a system that heats only when necessary, eliminates moisture effects, and assures that the volatile compounds stay intact for accurate measurement.

Installation and set-up of the SHARP is extremely simple without the need for complex components that require excessive time and effort.  Easy to navigate menus allow users to glide through set-up of parameters allowing the instrument to run almost effortlessly.  Routine maintenance is necessary only once per year making the SHARP the lowest maintenance continuous monitor in the market today.

Key  Features:

  • True continuous mass calibrated instrument for accurate PM measurements with high time resolution.
  • Intelligent Moisture Reduction System (IMR) eliminates moisture interference while preserving volatile aerosols.
  • Dynamic digital filtering for continuous calibration update.
  • Superior accuracy for consistent correlation with Federal Reference Methods.
  • Continuous measurement technique offers >99% data capture.
 
Related Products
 Product# Product Name Image  
  FH 62 C14   Continuous Particulate Monitor, FH 62 C14
  Select  
 
Purchase Details
SKU : 5030 SHARP 
Request Quote
Product Contact
 Sales Contact
  Service Contact
 
Specifications:
Concentration Ranges :0 to 1,000 µg/m³ and 0 to 10,000 µg/m³
Minimum Detectable Concentration Limit :<0.2 µg/m³ (1-hour time resolution)
Hourly Precision :+/-2 µg/m³ <80 µg/m³, +/-5 µg/m³ >80µg/m³
Measurement Time Resolution :1 minute
Precision Between Two Monitors :+/-2 µg/m³ (2-sigma, 24-hour average)
Span Drift :0.02% per day
Display Resolution :0.1 µg/m³
Accuracy :+/-5% (compared to 24 hour FRM)
Detectors :Optical: silicon/hybrid amplifier Beta: proportional counter
Sources :Optical: IRLED, 6mW, 880 nm Beta: carbon-14, 3.7 MBq (100 µCi), 5700-year half-life
Air Flow Rate :1 m³/h (16.67 lpm) measured across an internal subsonic orifice; user selectable from 0-20 lpm
Output :Two serial interface RS232 Analog output: 4-20mA or 0-10V output of concentration (µg/m³)
Operating Temperature :-22° to 140°F (-30° to 60°C)
Power Supply :Instrument: 10-240V, 50/60Hz, 330W max., 15W without pump or heater. Pump: 100-110/100-120V, 50/60Hz or 220/240V, 50/60Hz, 100W
Dimensions :Instrument: 19"(W) x 12.25"(H) x 13"(D) / 483mm(W) x 311mm(H) x 330mm(D) Pump: 8.25"(W) x 8.75"(H) x 4.25"(D) / 210mm(W) x 222mm(H) x 108mm (D)
Weight :Instrument: 50 lbs (22.5kg) Pump: 18lbs (8.1kg)