Thermo Scientific Labline Class 100 Clean Room Oven
The Thermo Scientific Class 100 Clean Room Oven meets or exceeds Class 100 air standards. Rapid temperature rise and recovery times ensure excellent temperature control and uniformity. Available HEPA filter models provide maximum contamination protection.
Product Detail
The Thermo Scientific Class 100 Clean Room Oven features an exclusive mechanical convection air flow system. To save space, a stacking option is available for the 3494M-1, and 3495M-1 series clean room ovens (120V; 50/60 Hz). Stacking racks allow you to stack two ovens of the same size safely. A fan removes heat generated by the bottom oven, preventing damage to the top unit.
3" (7.6 cm) of silica-based insulation between the chamber and exterior walls minimizes heat radiation to the surrounding environment.
Drawer-style control panel is protected from spills and pulls out easily for access.
Interior is corrosion-resistant stainless steel.
Adjustable perforated stainless steel shelves (4), supports and plenums are easily removed for cleaning.
Durable cold-rolled steel exterior features a white powder-coat finish.
Adjustable door hinge, lever-actuated positive door latch and silicone gasket prevent heat loss.
Adjustable 2" (5.1 cm) diameter exhaust port includes a damper control.
Safety
Adjustable high-limit hydraulic safety thermostat with indicator lamp maintains a temperature a few degrees above the set point in the event of primary control failure and prevents over temperature conditions.
Fused electrical system provides overload safeguards.
Operation
User-friendly PID microprocessor temperature control allows you to repeatedly set the operating temperature in range or ambient +5°C to 250°C.
Single program controller comes standard: eight segments, ramp adjustable from as low as 0.01°C per minute, dwell from 0 to 9999 minutes.
Four program controller offers 16 segments, ramp from as low as 1°C per minute, dwell from 0.0 to 999.9 minutes.
Platinum RTD sensor measures actual chamber temperature.
1/8" (3mm) NPT fitting is included for introducing inert gas or house air into the chamber.
Flowmeter and 0.3 micron filter for purging with nitrogen is available only on units with HEPA filters.
Optional recorder output is available: type K thermocouple with a sub-miniature connector on the back of the oven (TCK suffix for oven model number).
0 Items 
