alpha-pH1000 1/4 DIN pH/ORP Controller
 
  Downloadable Files:
 
 
 

  alpha-pH1000 1/4 DIN pH/ORP Controller


In environments with electrical interference, the alpha-pH1000 controller is ideal when configured to the symmetrical mode and used with a potential matching pin. 

*This product is not sold in North America

   Product Detail


  • Built-In Programmable Limit, Proportional (Pulse Length or Pulse Frequency) - ideal for precision process control applications
  • User-Customization through Advanced Setup Menu offers flexibility in matching the controller's functions to suit individual's specific requirement
  • Automatic Calibration with Auto-Buffer Recognition eliminates mistakes during calibration
  • Symmetrical Mode Operation eliminates electronic noise problems when used with solution ground
  • One-Point Online Calibration without shutting down the line
  • Hold Relay for use with float switches/flow switches and other controllers as a failsafe function
  • Two Level Password Protection prevents un authorized tampering with settings
  • 0 to 2000 Second Time Delay Adjustment on control and alarm delays
  • Galvanically Isolated Scaleable 0-20/4-20 mA Outputs for pH/ORP
  • Wash Contact Relay controls electrodes cleaning systems at desired duration and frequency
  • Choice of Glass or Antimony Electrode for general purpose or hydrofluoric acid applications
  • Adjustable Hysteresis (Dead Band) prevents rapid contact switching near set point
  • Non-Volatile Memory retains all stored parameters and calibration data even if power fails
  • Large Dual Display shows pH (or ORP) with temperature simultaneously - features clear multiple icons, set points, and status messages
  • Choice of Temperature Sensor Pt100/Pt1000 with 2-wire or 3-wire temperature input selection
  • Easy Installation and Wiring with detachable plug-in connectors

Applications

General: Useful for any batch or on-line type application that requires accurate pH or ORP control.

Water Purification/Treatment: Use for batch and on-line control of incoming process water, rinse water treatment, recirculating system and waste water treatment.

Industrial: Ideal for chemical processing, food processing. aquarium, pharmaceutical, hydroponics and waste control industries.

Regulatory: Hook to recorder to document data for regulatory compliance
 alpha-pH1000 1/4 DIN pH/ORP Controller
 PRODUCT# Price  Item  
       
 TSPHCTP1101      -    alpha pH 1000 pH / ORP Differential Controller / Transmitter with 0/4-20mA output and 110VAC setting (unit only)   SELECT  
 TSPHCTP1102      -    alpha pH 1000 pH / ORP Differential Controller / Transmitter with 0/4-20mA output and 220VAC setting (unit only)   SELECT  
Purchase Details
Request Quote
Contact Sales
 Sales
  Service
 
Specifications:
pH Range :-2.00 to 14.00 pH
Resolution & Accuracy :0.01 pH & ±0.01 pH
mV Range :-1000 to 1000 mV / 0 to 100% (for -100 to 100 mV)
Resolution & Accuracy :1 mV / ±0.1% & ±1 mV
Temperature Range :-9.9 to 125 °C
Resolution & Relative Accuracy :0.1 °C & ±0.5 °C
Temperature Sensor :Pt 100/ Pt 1000 (jumper selectable)
Temperature Compensation :Auto / Manual (reference at 25 °C)
Function (Switchable) :P/PI control (Pulse Length / Pulse Frequency); Limit Control; Off
Hysteresis :0.1 to 1 pH or 1 to 10.0% / 10 to 100 mV
Adjustable Period with Pulse Length Controller :0.5 to 20 seconds
Adjustable Period with Pulse Frequency Controller :60 to 120 pulses/min
Proportional Range :10 to 500%
Integral Action Time (IAT) :0 to 999.9 minutes
Pickup / Dropout Delay :0 to 2000 seconds
Switching pH Hysteresis :0.1 to 1 pH
Switching ORP Hysteresis :1 to 10.0% / 10 to 100 mV
Contact Outputs, Controller :2 potentialfree change-over contacts
Switching Voltage / Current / Power :Max 250 VAC / Max 3A / Max 600VA
Function (Switchable) :Launching or Pulse
Wash cycle :0.1 to 199.9 hrs
Wash direction :1 to 9999 s
Pickup Delay :0 to 2000 seconds
Switching Voltage / Current / Power :Max 250 VAC / Max 3A / Max 600VA
Power requirement :100/ 2200CD (jumper selection)
Frequency :48 to 62Hz
EMC Specifications :Emissions: according to EN 50081-1 Susceptibility: according to EN 50082-1
Signal Output :0/4 to 20mA, galvanically isolated
Load :Max. 600 ?
pH/ORP :BNC, screw terminals
Connection Terminal :Terminal blocks 5-pole/ 17-pole, removable
Main Fuse/ Fine Wire Fuse :Slow-blow 250 V/ 100 mA
Pollution Degree :II
Transient Overvoltage Category :II
Altitude :Up to 2000 m
Maximum Relative Humidity :80% up to 31°C decreasing linearly to 50% at 40°C
Power Supply :Mains supply voltage fluctuations not exceeding 10% of the nominal voltage
Ambient Temp. Operating Range :-10 to 50 °C
Dimensions :175 x 96 x 96 mm
Weights :Max. 0.7kg
Material :ABS with polycarbonate
Insulation :IP 54/ IP 40