HATR Flow Cells for ARK
The HATR Flow Cell for Spectra-Tech™ARK extends the versatility of the ARK by allowing dynamic studies of aqueous and nonaqueous liquids. The volume of the cell is 65 µl. The HATR Flow Cell has the unique capability to allow samples to be analyzed at elevated pressures from ambient to 500 psi. An extensive selection of crystal materials and angles are available for optimization of specific applications. The cell is constructed with a mechanically installed o-ring seal making it leakproof, durable and demountable for easy crystal removal and replacement.
|
Applications
• Dynamic quantitative and qualitative liquid studies
• Strongly absorbing liquids
• Flow studies
• Quality control for repetitive sample analysis
• Viscous liquids
• Oil analysis
|
|
|
Features
• Available with a choice of crystal materials
• Pressure range: ambient to 500 psi
• Easy to flush and clean
• Includes Teflon tubing
• Demountable for easy crystal removal and replacement
|
Temp. Controller Specifications
• 110/220V, switchable
• Heater wattage: 300 watts
• Accuracy: +/- 0.1° C @ temperature
• Probe type: RTD temperature sensor
|
Note: Alternative crystal materials and angles may be substituted for the standard crystals listed below. Please call for more information.
Heated HATR Flow Cells for ARK
The Heated HATR Flow Cell greatly extends the versatility of the ARK by allowing thermo dynamic studies of aqueous and nonaqueous liquids. The Heated HATR Flow Cell has the unique capability to allow samples to be analyzed at elevated temperature and pressure. The standard Heated HATR Flow Cell comes with a ZnSe 45° crystal that is ideal for a broad range of liquid samples, or a ZnSe 40° crystal, ideal for engine oil analyses. Other crystal materials and angles are available for optimization of specific applications and can be ordered in place of the standard crystals; however, not all materials are suitable for this cell. For example, Ge becomes infrared opaque and can be permanently damaged when heated above 50°C; therefore, call to determine the appropriate crystal material for the application.
Applications
• Aqueous and nonaqueous liquids
• Viscous samples
• Accurate quantitative measurements
• Oil analysis
Features
• Includes Temperature Controller, heating cartridges, safety cage and Teflon tubing
• Temperature range: ambient to 200°C
• Pressure range: ambient to 500 psi
• Cell volume: 65 µl
• Zero dead volume
• Easy to flush and clean
• O-ring seal makes cell leak-proof, durable and demountable for easy crystal removal and replacement
0 Articoli 
