Some models feature formaldehyde neutralizing filters and recirculated air.
Models that use filters and an integral blower are available for short-distance applications.
Other models connect to the facility exhaust system.
See the following page for technical information on air processing options. Superior Quality
Stainless steel work surfaces and panels.
Extruded aluminum frame is designed to distribute weight evenly, stand up to heavy use, resist corrosion, add durability and minimize unit weight.
Ships in two easily manageable pieces that fit through standard doorways.
Built tough to stand up to years of heavy work without corrosion. Programmability
Programmable microprocessor allows clock time to be changed or the filter replacement alarm to be reset.
Superior Functionality
Models with elevating work surface or with fixed-height work surface are available.
Elevating units have a user-adjustable work surface from 33.5" to 45.5" (85.1 to 115.6 cm).
Fixed-height units have a work surface that is factory set to your specification from 33.5" to 45.5" (85.1 to 115.6 cm).
Deep sink with hot and cold water faucet.
1/2 horsepower disposal is standard; optional 3/4 horsepower disposal is available (please check with local authorities before ordering a unit with disposal; some areas prohibit the use of disposals).
Hands-free or manual controls for water, disposal, and optional dictation system.
Abundant light directed to the work surface.
Vacuum breaker-protected water supply.
Appliances plug directly into the unit for convenient use.
One hospital-grade duplex ground fault circuit interrupter (GFCI) receptacle on 110-120V units.
Two IEC 320 receptacles on 220-240V units.
Facility supplied residual current device (RCD) is required for 220-240V units.
Two optional tape recording units available.
Each unit comes complete with a magnetic tool bar, integral centimeter rulers, formalin dispenser, and paper towel dispenser.
Built-in table rinse washes down work surfaces quickly.
Designed for Easy Shipping and Installation
All units ship in two convenient pieces.
Both parts fit through a standard 32" (81.3 cm) doorway.
The two halves link firmly with easy-to-lock latches.
The unit connects directly to the facility’s hot and cold water supplies and drain.
Units are hard wired to the facility’s electrical system.
Choosing the Exhaust System to Fit Your Lab Recirculating For existing labs or labs without facility exhaust, it may be necessary to filter and recirculate the air. Specify a unit with integral blowers or filters.
External Exhaust For distances that do not exceed 20 feet (6.1 m), you may choose a unit with integral blower and filters that may be connected to your facility’s duct for venting.
Remote Exhaust If your facility can supply an exhaust duct and remote blower system that provides an airflow of 550 to 600 cfm (0.260 to 0.283 cu. m/s), a ducted unit will best suit your needs.
Overall:* 81”-93” x 60” x Varies (205.7 - 236.2 x 152.4 Varies cm)
Width shown in chart at right
*Height is fixed on Fixed-Height units.
Work Surface Height:** 33.5” - 44.5” (85.1 - 115.6 cm)
**Customer specified on Fixed-Height units.
Right-Hand Sink: 14” x 12” x 6” (35.6 x 30.5 x 15.2 cm)
Weight :
Top Piece: Uncrated: 285 lbs. (129.3 kg) Crated: 375 lbs. (170.1 kg)
Bottom Piece: Uncrated: 475 lbs. (215.5 kg) Crated: 545 lbs. (247.2 kg)
Electrical Specifications :
• Unit is hard wired to facility power.
• 110-120V models draw 20 amps and require a separate 15 amp circuit
for one hospital-grade duplex ground fault circuit interrupter
(GFCI) receptacle.
• 220-240V models draw 20 amps including up to 7 amps by the two
IEC 320 receptacles with facility-supplied residual current device
(RCD) protection required.
Plumbing Specifications :
• 3/4" hot and cold water supply lines with shut off valves and 1 1/2"
drain line must be supplied.
• 1/2" industrial grade flexible hoses with 3/4" female hose fittings are
supplied for connection to water supply lines.
• 1 1/2" I.D. reinforced flexible hose is provided for connection to
facility drain line.
0 Items 
