The Ramsey Model SWAX-7000 Primary Sweep Type Sampler offers an economical and simple means to procure a representative sample directly from material on a conveyor belt. With over 1,000 units in service worldwide, it has been subjected to rigorous in-the-field testing and meets ASTM and ISO specifications.
Product Detail
This sampler can be used as a stand-alone sampling device or as a primary in a multi-stage mechanical sampling system. Direct increments are obtained from in-motion, horizontal or inclined conveyors. It is ideally suited for the sampling of coal, limestone, ferrous and non-ferrous ores, sand, crushed rock and gravel. In high tonnage applications, the cutter is counterbalanced to prevent excessive stress on the conveyor.
Features and Benefits
Compact design is well-suited for low headroom installations.
Ease of installation results in modest installation costs.
Mounts directly to existing or new conveyors. No transfer point is required.
Rigid construction of tubular structural steel maintains positive alignment.
Direct drive for positive stopping whether the belt is loaded or empty.
Skirtboards on sampler prevent material spillage.
Cost efficient. Small primary increment means smaller, less expensive equipment in the reduction stages of system.
Non-contact proximity switches for start-stop control.
Replaceable steel brushes and urethane wiper assure fines will be removed and included in representative sample.
Samplers counterweighted to eliminate high eccentric loading on 36" and larger belts.
0 Items 
