The Aquakem 600 is the most sophisticated model in the Aquakem range of fully automated photometric analyzers. Its advanced technology and new design offer efficiency and accuracy in analysis as well as convenience in use. The Aquakem 600 analyzer with its integrated workstation and keyboard is an ideal choice for laboratories with higher throughput needs but limited space. Aquakem ready to use reagents allow full automation and eliminate time consuming reagent preparation. These system reagents are bar-coded and delivered in pack sizes suitable for a variety of testing throughput. The current range of Aquakem system reagents include Ammonia, Chloride, Nitrite, Phosphate, Sulphate and T.O.N.
Product Detail
The Thermo Scientific Aquakem 600 analyzer is
a fully automated photometric instrument for the wide range
of water and environmental tests. The comprehensive test menu is based on
methodologies recommended by the standard methods for the examination of water
and wastewater in many countries and U.K Blue Book. Aquakem 600 runs up to
600 tests per hour and can be connected to automated sample track systems.
Offering the ultimate in performance Aquakem has been designed for minimum
reagent consumption and low operating costs. The unique low volume multicell
cuvette provides true discrete analysis virtually eliminating carryover. Typical
total reaction volumes of between 100ul and 200ul per test mean extremely low
reagent costs.
Discrete, selective either random access or batch analysis.
Analysis Type :
Colorimetric end-point, linear and non-linear reactions, turbidimetric and bichromatic with or without sample blanking.
Analytical Rate :
Up to 600 tests/hour
Measurement :
Single channel interference filter photometer with beam splitting reference. The 12 reaction cells are measured in sequence, 13 wavelegths supplied, 340 - 880 nm.
Samples :
Suitable for raw, potable, wastewater, saline and boiler water. Max on-board capacity 6 segments each with 14 positions for samples. Continuous access without interrupting test processing.
Reagents :
On-board 45 pos. in the refrigerated reagent compartment. All reagents are automatically identified using barcode labels. Real time reagent status clearly displayed. Up to four reagent additions / test possible. Continuous access to reagents without interrupting test processing.
Reaction Vessel :
Disposable multicell cuvettes. Continuous loading of cuvettes with capacity for 2100 tests.
Sample Dilution :
Automatic sample dilution of over-range tests with automatic re-run. Manual dilution by operator if required, corrected result identified.
Calibration :
Up to 8 standards per chemistry, standardisation interval user definable. Polynomial curve fitting and modification, previous curve comparison. Calibration with separate standards or by automatic dilutions of a stock standard. Automatic bias correction possible.
Quality Control :
Up to 6 levels per chemistry, control frequency is user definable. Poor control results are flagged. Summaries of SD, CV's and mean on all controls are displayed graphically.
Data Handling :
Integrated workstation, sw running under Windows XP, graphical user interface, touch screen. Sample barcodes in use: Code 128, Code 39, USS Codabar, Interleaved 2 of 5.
Dimensions and Weight :
170 cm width + workstation arm max 80 cm, 120 cm height, 82 cm depth, weight 375 kg.
Power Requirements :
100-240 V +/-10%, 50-60 Hz +/-5%, 900 W + workstation PC and monitor. Battery back-up facility.
Distilled Water Consumption :
Typically less than 2 litres/hour, no plumbing required.
0 Items 
