AutoGAGE uses reed switch technologoy, which once installed never requires calibration. It measures temperature and level of two different fluid densities accurately and the accuracy is maintained over the entire length of the sensor.
Product Detail
True digital electronics with precise increments
Once installed, sensor never requires calibration
Passive switching elements to reduce energy consumption
All electronics sealed inside the sensor tube
Intrinsically safe apparatus when connected to approved barriers
Approved remote intrinsically safe barriers available to mount within the RTU
enclosure
Field wire connection includes a surge-protected plugable fuse board
Rigid tubing completely assembled: 2' to 25' in 1' increments. - Modular tubing assembled by installer: 5' to 80' in 1' increments.
Tubing Material :
Fiberglass: Standard
- Stainless Steel or Teflon: Optional
Float :
UHMW-NYTROPHYL or
NYTROPHYL Stainless Steel
- One Standard, Two Optional
for water interface.
- Pass through a 4" tank port:
Standard
- Pass through a 3" tank port:
Optional
Measurement. Increments.& Accuracy :
Standard 1/4" ? 1/8" 1/2" ? 1/4" - Optional 1/10" ? 1/20" 1/8" ? 1/16" - Other options available upon request
Operational Temperature Range :
(Digital)
-40 Deg. F to +185 Deg. F: Standard
- -40 Deg. F to +203 Deg. F: Optional
Temperature Measurement :
Display of EF: Standard
- First Sensor 12" from
bottom: Standard
- 0-8 Temperature Sensors
available with desired
spacing
- Display of Centigrade:
Optional
Temperature Measurement Accuracy :
? .5 Deg. C: Standard - ? .1 Deg. C: Optional
Input Power :
12 VDC ? 15% at Sensor
terminals
Current Draw :
70mA Maximum
Working Pressure :
15 psi: Standard
- 15 to 1000 psi: Optional
Communication :
RS485
2 or 4 wire
Baud rate and parity
programmable
- 4-20 mA signal available
when connected to Digital to
Analog Converter Board
0 Items 
