Welcome Guest from United States
Sign In Change Country
  0 Items
Search:
Two-channel control card, SafeTNet 2000

Configure your own Model STN2000 using the following steps:

Step I: Specify the type and quantity of each transmitter
*Transmitter(s) must be purchased sperately. Wiring not included.

Available Gas Transmitters for the STN2000 system:

Standard Diffusion Transmitter
Single-point gas detection sensor
FX-SMT Transmitter 
Intelligent single gas detection transmitter detects 
oxygen, combustible and various toxic gases
FX-SMTn Transmitter 
Non-intrusive gas detection transmitter designed for 
use in non-hazardous areas
FX-IR Transmitter
Dual infrared technology for detection of combustible gases

 

 

 

 

 

 

Step II: Specify the quantity of STN200 control cards
To determine the number of cards, divide the transmitter selection by two
*Each control card has inputs for receiving signals from a combination of any two transmitters.

Description: Part #:
STN2000 Control Card 73-0001 

 

 

Step III: Specify the size of card rack to accomodate the number of control cards
Half Rack    Up to four control cards with power supply
Full Rack    Up to nine control cards with power supply

Description: Part #: Dimensions: 
Half Rack 21-4055  7.1"H x 10.6" W x 11.2" D 
Full Rack 21-4054 7.1" H x 19.0" W x 11.2" D

 


 

Step IV: Specify the power supply

Description: Part #:  Inputs/Outputs: 
Half Rack 49-0074  100 VAC - 230 VAC, 50 Watts 
Full Rack 49-0072 100 VAC - 230 VAC, 150 Watts

 





>>Return to the SafeTNet2000 Homepage